|
DV PROMIX 1
Audio Production Tool
The new DV ProMix 1 combines several
features into one flexible audio tool for field production. The DV
ProMix 1 contains a balanced XLR input with switchable 12T or 48PH
microphone powering, followed by a very low noise microphone pre-amp with
continuously variable gain and switchable low cut filter.
The
DV ProMix 1 also incorporates a bright sunlight readable LED peak
meter, a transformer balanced line driver and switchable limiters on both
the pre-amp and the line driver amplifiers. In addition, the DV ProMix 1
features a monitor return amplifier with a balanced XLR input and
continuously variable gain for flexibility. Headphone monitoring can be
selected from Direct to both ears, Monitor to both ears, or a combination of
the two.
The
DV ProMix 1 will also except an optional Boom Pole Remote slide fader
like our AlphaMix for easy operation while booming. Power is provided by
two, 9 volt batteries or external 7-16Vdc. A belt clip is provided.
The DV ProMix 1 can be used for Boom operators
feeding DV cams or other types of recorders, or for use as microphone to
line amp or as a standalone limiter, or for radio remotes or as a mic power
supply and pre-amp or in a host of other ways.
 Designed
& Assembled in America
|
FRONT PANEL |
REAR PANEL |
Monitor Return Gain
(continuously variable, push pot) |
Headphone Jack, 1/4" stereo
|
Pre-amp Gain
(continuously variable, push pot) |
Boom Remote Connector, TA5M, for use
with option boom remote slide fade |
Headphone Volume
(continuously variable, push pot) |
Balanced Monitor Input, XLR-3 Female,
excepts signals from -50dBv to +10dBv |
|
Power Switch, internal, off, external,
two color LED indicates low battery |
Balance Microphone Input,
excepts signals from -65dBv to -5dBv |
|
Low Cut Filters, 80Hz, 20Hz (flat),
150Hz |
12T/48PH Switch, selects
12T, DYN or 48PH microphone power |
|
Limiters, Pre-amp and Line Driver Amp,
on, off, 2 LED's indicate limit action |
Mic/Line Switch, Selects output level,
0dBv, -10dBv, -40dBv |
Headphone Selection,
D (direct), M (monitor return), D/M split ears |
Output Connector,
transformer balanced, XLR-3-Male |
|
RC (remote control) LED indicates when
Boom remote is being used |
Ext Power, 2.5mm Jack,
excepts 7 to 16Vdc |
|
Fader, smooth ergonomic fader knob |
|
Output Meter, super bright
multi color LED's, Peak reading |
|
Size
|
4.6" x 1.9" x
5.6" (11.6cm x4.8cm x 14.2cm) |
|
Weight
|
1 Lb, (0.45Kg) |
|
Product Number:
|
FPSCDVMIX1 |
Power: |
2x
9 Volt Batteries or external 7-16Vdc
|
|
Mic Power
|
12T and 48PH to
DIN Specs |
Limiters: |
1ms attack,
100mS release |
|
Chassis:
|
Aircraft
Aluminum |
Finish: |
Powder Coat,
Black |
|
Low Cut Filters:
|
6dB/octave, -3dB
at 80Hz, 150Hz |
Signal to
Noise: |
Mic pre-amp,
128dB EIN A weighted |
|
Warranty
|
One year limited |
Features
& Specifications subject to change.
|
